Osmotron
Osmotron
Osmotron
OSMOTRON NG-3_1280x1280
OSMOTRON NG-4_1280x1280
OSMOTRON NG-5_1280x1280
Osmotron
Osmotron
Osmotron
OSMOTRON NG-3_1280x1280
OSMOTRON NG-4_1280x1280
OSMOTRON NG-5_1280x1280

OSMOTRON

Best in class water purification for PW and WFI

 
More information
  • Proven technology: updated to meet the latest industry requirements
  • Optimized for sustainability: with reduced water and energy consumption
  • One Platform: for PW and WFI
  • Modular design: for a wide range of user specific adaptations
  • Future proof: thanks to a wide range of upgrade possibilities
Springe zu

Built on decades of expe­ri­ence

best in class water purification for PW and WFI

Since 1996, the OSMOTRON product family is our flag­ship for PW and WFI gener­a­tion based on membrane tech­nology. Far more than 1000 Units world­wide have proven the quality, robust­ness and reli­a­bility of this system.

Now it’s time to present the next gener­a­tion, combining the latest tech­nical improve­ments to address the most demanding expec­ta­tions of the phar­ma­ceu­tical industry. The improve­ments are focused on effi­ciency, sustain­ability, robust­ness, automa­tion and stan­dard­iza­tion.

One platform covering PW and WFI from 800 to 12,000l/h on one skid to reduce footprint. System can be customized up to 50,000l/h on multiple skids.

Osmotron
Osmotron

The new OSMOTRON is built as a single plat­form covering all compo­nents to produce Puri­fied Water (PW) or Water for Injec­tion (WFI). This plat­form is easily config­urable for many different needs. It can be deliv­ered with inte­grated hot water sani­ti­z­able soft­ener, single or double pass Reverse Osmosis (RO).

What have improved

System Simpli­fi­ca­tion

Water effi­ciency up to a WCF of 98%

Energy reduc­tion

Sustain­ability

Process robust­ness/-opti­miza­tion

Central sampling points

Cont­a­m­i­na­tion Control

Up to 30% cost reduc­tion per m3 of WFI/PW

Block ​Valve Tech­nology

Wher­ever possible block valves are intro­duced to

  • mini­mize dead legs and foot­print
  • maxi­mize hygienic design
  • Increase proces­sual flex­i­bility
  • Reduce pres­sure loss
Gemü Ventilblock_1280x1280

Stain­less Steel Soft­ener

  • Hot water sani­ti­z­able
  • Quality controlled instead of volume-based regen­er­a­tion
  • Reverse flow regeneration
  • Conductivity controlled regeneration steps

→ Full utiliza­tion of the resin capacity

→ Reduction of salt, water and wastewater consumption

OSMOTRON NG-3_1280x1280

Septron Module

  • Proven EDI tech­nology
  • Small foot­print
  • Optional with inte­grated ultra filtra­tion module
  • Seal-free spiral design
  • Excep­tional reduc­tion in TOC, high reduc­tions in SiO2 and CO2
Septron

IPC and Process Optimization

  • Optional inte­grated TOC and bioburden moni­toring
  • Inte­grated trend moni­toring in the HMI
  • Conductivity controlled RO recovery
AquaSense MB

AQU@Service for PW systems

Maximum safety, reliability, and value retention in critical production applications are achieved via quality systems, preventative service, and intelligent spare parts management.

The planned AQU@Service with replacement of all wear parts, documented calibration of sensors, and replacement of all seals and membranes means you're on the safe side with BWT when audits and inspections occur.

Advice

Unexpected error. Please try to reload the page

Osmotron

OSMOTRON